Escort EZ Mag Detector Holder Mount - Mount Only, No Receiver

Escort (EZ Mag) - RAD MAG Detector Holder Mount (Mount Only)

2 Pin - Power Only (Standard)

$59.00

Escort (EZ Mag) - RAD MAG Detector Holder Mount (Mount Only)

$59.00

Detector side only - pairs with a receiver you already own
N45 magnets with a 4.5kg hold
10cm RJ11 lead soldered to the pogo pins
Uses your factory 25mm EZ Mag pivot bracket

30-day money-back guarantee

Mount only - the windscreen receiver is NOT included

This is the detector-side holder mount on its own. It needs a RAD MAG powered receiver already fitted to your windscreen to dock onto and draw power from.

No receiver yet? Get the full combo kit instead →

Not sure if you need 2-pin or 4-pin? See the pin count guide →

Fitment note

Mount only - the powered windscreen receiver is NOT included. Your pin count must match the receiver you already have.

Extreme Grip: N45 magnets rated for 4.5kg of breakaway force - it will not budge until you want it to.
Integrated Power Pins: Pogo pins collect power straight off your RAD MAG receiver, so there is no cable running between your detector and the windscreen.
RJ11 Lead Attached: A 10cm RJ11 lead is soldered internally to the pogo pins. Plug it into your detector and you are finished.
NZ Made: Printed in heat-stable ASA-CF for New Zealand UV and summer windscreen temperatures.

Escort Redline 360C
Escort Redline EX
Escort MAX 3
Escort MAX 360c / MAX 360c MKII
All Escort EZ Mag Detectors

1x RAD MAG detector holder mount for Escort EZ Mag detectors, in your chosen pin count
10cm RJ11 lead, soldered internally to the pogo pins and ready to plug into your detector
Not included: the powered windscreen receiver and power cable. Buy the combo kit listing if you need those.

A RAD MAG Powered Receiver: Already fitted to your windscreen and wired. This listing does not include one.

Matching Pin Count: A 2-pin holder mount only works with a 2-pin receiver, and a 4-pin only with a 4-pin. They are not interchangeable, and forcing a mismatched connection can damage your detector.

Factory EZ Mag Hardware: The 25mm pivoting bracket, mounting bolt and square-neck screw from your original Escort sticky cup mount.

Important: 2-Pin and 4-Pin systems are not cross-compatible. Your detector, mount, and power cable must all use the same pin configuration.

2-Pin (Power Only): Your detector functions as it does today. All functions on the detector work. No remote mute switch.
4-Pin (Power + Mute/Alert/Data): Allows you to use a remote mute hardwire kit.

Unsure which one you need? Message us before ordering and we’ll help you confirm!

This guide is only required if you are installing our 4-pin mount to connect with your existing Escort SmartCord Hardwire Kit.

Not using a SmartCord? Save time and select our standard 2-pin option instead.

Pin	Function	Mount	Escort SmartCord
P2	Alert LED output	Yellow	Black
P3	+12V power	Red	Red
P4	Ground	Black	Green
P5	Mute input	White	Yellow

On the Escort SmartCord: Green = GND, Black = Alert — opposite of what the colours suggest.

Detector Mount
2-Pin vs 4-Pin Guide
4 Pin Wiring Guide (Mute button)

30-Day Money-Back Guarantee

Mount it. Drive it. If it’s not right, send it back for a full refund.

Full policy ›

Frequently asked questions

Are 2-Pin and 4-Pin mounts interchangeable?

No. They are completely non-interchangeable. They use different physical connectors and internal layouts. Mixing components or forcing a mismatched connection can permanently damage your radar detector.

Does my detector still fully function on 2-Pin?

Yes. All on-device features (Mute, Mark, top buttons, display, and audio alerts) work perfectly normal on both versions. "No alert out" simply means the 2-Pin mount cannot send signals to external, separate dash accessories (like a remote mute button or motorcycle helmet link).

Which one do I need?

Mount Type	Best Used For	Confirmed Models
2-Pin (Power Only)	Simple, clean hardwiring (e.g., mirror taps or basic fuse box power) where you just want the detector to power on and function as usual.	Standard power-only setups.
4-Pin (Power + Data)	Required if you are using the manufacturer's factory "smart" hardwire kit with a remote mute button.	Uniden R4 / R7 / R8 / R8NZ, Escort EZ Mag, V1 Gen 2.

⚠️ Bottom Line: If you want to use a Escort Smart Cord, Uniden Remote Mute Kit or Valentine One ESP Devices and are comfortable with soldering wires get the 4-pin. Otherwise, the standard 2-pin is fine for most users, If still unsure, message us before buying. 😊

We will work quickly to ship your order as soon as possible. Once your order has shipped, you will receive an email with further information. Delivery times vary depending on your location.

The process is super simple and is virtually the same for both Escort and Uniden Detectors.

Click Here for a video tutorial: Video Tutorial

All you need to do is connect the 12V Power source and the negative loop terminal.

Here is a guide to follow.

Our products are manufactured both locally from 3D Printed parts and imported electronics. We carefully select our manufacturing partners to ensure our products are high quality and a fair value.

Note: 3D Parts can have slight imperfections. However, they are functionally tested and are tested to work as intended.