{"product_id":"quick-connect-power-lead","title":"Quick Connect Power Lead - 12V Hardwire or Mirror Tap","description":"\u003cp\u003eA spare power pigtail for your RAD MAG powered receiver, with a quick disconnect already fitted. Pick the version that suits how you take power: a 2.5 metre 12V hardwire run with a ring-terminal ground loop, or a 40cm mirror tap with back-probe spade terminals.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eOne detector, two cars\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eYour powered kit already ships with a cable. This is the spare. Wire a pigtail into your second vehicle once and move the receiver between cars in seconds - no tools, no re-wiring, and nothing left dangling in the car you are not driving.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eQuick disconnect fitted:\u003c\/b\u003e A D2 quick-splice crimp connector is already on the receiver end - no soldering, no cutting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpare connector in the box:\u003c\/b\u003e A second matching D2 connector ships with it, so you can crimp the mating half onto your powered receiver's own cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo ways to take power:\u003c\/b\u003e Hardwire down to the fuse box, or tap the feed at a powered rearview mirror.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eA useful backup:\u003c\/b\u003e If your mirror turns out not to carry a switched 12V feed, the hardwire version gets you running without waiting on another order.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003e12V Bare Wire \u0026amp; Ground Loop - 2.5m\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eAround 2.5 metres of twin red and black cable. The ring-terminal ground loop bolts to any solid chassis earth point, and the bare 12V tail is ready to join a fuse tap or another switched 12V source. Long enough to run down the A-pillar and along the kick panel to the fuse box.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eYou will need:\u003c\/b\u003e a switched 12V source - a \u003ca href=\"\/products\/hardwire-fuse-tap\"\u003eHardwire Fuse Tap\u003c\/a\u003e is the tidiest way to get one - a solid chassis earth point, and basic hand tools.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSwitched 12V only:\u003c\/b\u003e Wire to a source that switches off with the ignition. A constant live feed will drain your battery overnight.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eMirror Tap Spade Terminals - 40cm\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eAround 40cm long. The two slim spade terminals back-probe into the rear of your mirror's existing connector, alongside the wires already seated in it, so you piggyback the 12V feed without cutting, stripping or splicing a factory wire. The mirror circuit is already fused and switches with the ignition, so there is no fuse to fit and no trip to the fuse box.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eYou will need:\u003c\/b\u003e a powered rearview mirror with a confirmed 12V feed, access to the back of its connector, and a multimeter to check the feed before you connect.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003ePower pigtail only. The powered receiver, detector mount and fuse tap are sold separately. Not sure which suits your car? Read the \u003ca href=\"\/pages\/power-options\"\u003ePower Options guide\u003c\/a\u003e or message us.\u003c\/p\u003e","brand":"Rad Mag NZ","offers":[{"title":"12V Bare Wire \u0026 Ground Loop (2.5m)","offer_id":46920797192391,"sku":"RM-QCL-HW","price":29.0,"currency_code":"NZD","in_stock":true},{"title":"Mirror Tap Spade Terminals (40cm)","offer_id":46936547623111,"sku":"RM-QCL-MIR","price":29.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/6616\/6727\/files\/radmag-quick-connect-lead-mirror-tap.jpg?v=1785711937","url":"https:\/\/www.radmag.nz\/products\/quick-connect-power-lead","provider":"Rad Mag NZ","version":"1.0","type":"link"}